User Tools

Site Tools


welcome

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
welcome [2017/10/13 22:49]
alex [firmware tftp]
welcome [2017/10/13 22:57] (current)
alex [firmware tftp]
Line 2923: Line 2923:
  
 2). After the above procedure, it's recommended to first start the tftp on the server before starting the tftp transfer procedure at the bullet-m. 2). After the above procedure, it's recommended to first start the tftp on the server before starting the tftp transfer procedure at the bullet-m.
 +
 +===Further annoying issues as of October 2017==
 +
 +1). to avoid any networking locking issues it's better to connect the device on a fast 100Mbit switch.
 +
 +2). start the tftp (I use atftp)
 +
 +3). cold reboot the Bullet-M ​
 +
 +4). either hold the reset for 10 seconds and then release it or start the urescue from the U-boot menu on the serial console.
  
 ====== bullet 5 Openwrt ====== ====== bullet 5 Openwrt ======
welcome.txt ยท Last modified: 2017/10/13 22:57 by alex