User Tools

Site Tools


welcome

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
welcome [2024/02/23 15:38]
192.168.1.23 [Converting from German to International]
welcome [2024/02/27 20:02]
192.168.1.23 [Converting from German to International firmware]
Line 3531: Line 3531:
   user adam2 adam2   user adam2 adam2
 you may now enter the following command and very quickly power on your Fritz box you may now enter the following command and very quickly power on your Fritz box
-  quote GETENV firmware version+  quote GETENV firmware_version
      
 if the result is: if the result is:
Line 3540: Line 3540:
  
 you can even power off and then power on again your device and without disconnecting your linux lftp, issue the  you can even power off and then power on again your device and without disconnecting your linux lftp, issue the 
-  quote GETENV firmware version+  quote GETENV firmware_version
 in-order to confirm that your Fritz returns the international ID in-order to confirm that your Fritz returns the international ID
   firmware_version avme   firmware_version avme
 you may now use the [[https://download.avm.de/archive/fritz.box/fritzbox.wlan_3370/x_misc/english/|international recovery tool]] to flash your Fritz box with the international firmware which supports both Annex A & Annex B you may now use the [[https://download.avm.de/archive/fritz.box/fritzbox.wlan_3370/x_misc/english/|international recovery tool]] to flash your Fritz box with the international firmware which supports both Annex A & Annex B
  
-the above steps, successfully converted my two German Fritz 3370 to the international version. this same procedure may or may not work on your similar but nox exact Fritz box+the above steps, successfully converted my two German Fritz 3370 to the international version. this same procedure may or may not work on your similar but not exact Fritz box
  
 Good Luck        Good Luck       
 +==== Flashing openwrt ====
 +you need [[https://github.com/openwrt/openwrt/blob/main/scripts/flashing/eva_ramboot.py|eva_ramboot.py]] along with an [[https://downloads.openwrt.org/releases/22.03.6/targets/lantiq/xrx200/|initramfs-kernel.bin]] image
 +
 +remove power from your fritz box and issue the following command (use the appropriate initramfs-kernel for your box):
 +  eva_ramboot.py 192.168.178.1 openwrt-22.03.6-lantiq-xrx200-avm_fritz3370-rev2-micron-initramfs-kernel.bin
 +power on your fritz box, wait a few minutes and you should be able to log in 192.168.1.1
 +
 +you can now download the proper sysupgrade image and finalize your install
welcome.txt ยท Last modified: 2024/02/27 20:02 by 192.168.1.23