Differences

This shows you the differences between two versions of the page.

--- welcome [2017/10/13 19:49]
alex [firmware tftp]
+++ welcome [2020/12/14 16:38]
alex [rb711 flash howto]
@@ Line 2923: / Line 2923: @@
 ). After the above procedure, it's recommended to first start the tftp on the server before starting the tftp transfer procedure at the bullet-m.
+===Further annoying issues as of October 2017==
+). to avoid any networking locking issues it's better to connect the device on a fast 100Mbit switch.
+). start the tftp (I use atftp)
+). cold reboot the Bullet-M
+). either hold the reset for 10 seconds and then release it or start the urescue from the U-boot menu on the serial console.
 ====== bullet 5 Openwrt ======
@@ Line 3280: / Line 3290: @@
   opkg install quagga-bgpd
-====== rb711 flash howto ======
+====== rb711 serial pins ======
+{{http://wiki.ozo.com/rb711-5hn-m_s.jpg?140 }}
+a full detailed picture [[http://wiki.ozo.com/rb711-5hn-m.jpg|here]]
+====== rb711 flash howto ======
 Connect ethernet to the RouterBoard device

OZOnet Wiki