Differences

This shows you the differences between two versions of the page.

--- welcome [2024/02/23 15:49]
192.168.1.23 [Converting from German to International firmware]
+++ welcome [2024/02/27 20:02] (current)
192.168.1.23 [Converting from German to International firmware]
@@ Line 3545: / Line 3545: @@
 you may now use the [[https://download.avm.de/archive/fritz.box/fritzbox.wlan_3370/x_misc/english/|international recovery tool]] to flash your Fritz box with the international firmware which supports both Annex A & Annex B
-the above steps, successfully converted my two German Fritz 3370 to the international version. this same procedure may or may not work on your similar but nox exact Fritz box
+the above steps, successfully converted my two German Fritz 3370 to the international version. this same procedure may or may not work on your similar but not exact Fritz box
 Good Luck
+==== Flashing openwrt ====
+you need [[https://github.com/openwrt/openwrt/blob/main/scripts/flashing/eva_ramboot.py|eva_ramboot.py]] along with an [[https://downloads.openwrt.org/releases/22.03.6/targets/lantiq/xrx200/|initramfs-kernel.bin]] image
+remove power from your fritz box and issue the following command (use the appropriate initramfs-kernel for your box):
+  eva_ramboot.py 192.168.178.1 openwrt-22.03.6-lantiq-xrx200-avm_fritz3370-rev2-micron-initramfs-kernel.bin
+power on your fritz box, wait a few minutes and you should be able to log in 192.168.1.1
+you can now download the proper sysupgrade image and finalize your install

OZOnet Wiki